Posts Tagged ‘workplace electrical safety’

5 Tips For Improving Electrical Safety In The Workplace

by Annie Cooper

In any workplace, electrical safety should be a top priority. Some industries are more concerned about electrical safety than others, but all businesses need to be aware of electrical hazards on the job and how to mitigate them. Electricity hazards at work can be minimized in a variety of ways thanks to a few easy measures that employers can take. Here are 5 simple and easy ways to improve electrical safety at work.

Conduct Risk Assessments

As one of the most important electrical safety topics, risk assessments can prevent accidents and reduce risks overall. Workers should conduct risk assessments of all electrical hazards on-site before beginning any work. By taking such precautions, you can inform your employees about the dangers present at the site, and set up safety plans and procedures to prevent any mishaps.

Ensure employees have proper training in electrical equipment

The following workplace electrical safety tip might seem unnecessary because your employees are professionals, but this is often overlooked. Every field is susceptible to bad habits and improper use when workers use the same equipment every day. Electrical work can be very dangerous, so it’s vital that your workers receive the appropriate training for their duties. Also, workers need to know how to use each tool correctly, especially while performing direct electrical work.

Never work in wet conditions

It’s no secret that water and electricity don’t mix well. Working around electrical equipment while it is wet will significantly increase the chances of getting electrocuted, especially if it is poorly insulated. A qualified electrician must inspect wet electrical equipment before power is re-connected to ensure worker safety. Employees should be trained to avoid contact with circuits and electrical equipment if they have wet hands.

Prioritize Safety Signage

It is perhaps the bare minimum an employer can do to protect employees during electrical work. When it comes to safety signs, they should be a reminder to employees and reinforce what they have already learned. However, posting warnings about electrical hazards is not inadvisable. A reminder of the potential dangers of working with electricity is just one more way to keep workers safe.

Always wear personal protective equipment

This might be the most important of all the workplace electrical safety tips discussed here. The first line of defense against any potential shocks that you may suffer on the job is personal protective equipment. As a safety precaution, it is recommended that you use electrical gloves and footwear whenever working in the electrical construction industry. This will help you avoid any accidents that may occur randomly despite following your electrical safety plans. In addition to wearing a face shield and a fire-resistant helmet, you should also wear eye and ear protection if you are working with wiring or electricity.

Safety should always be the number one priority on any construction site, especially in the electrical construction industry. Working with electrical equipment can be dangerous, but these tips should help you minimize the risks as much as possible.

Take advantage of these five tips to improve electrical safety on the job site. For easy and convenient workplace safety solutions, contact the experts at Emedco today!

May Is National Electrical Awareness Month!

by Andrew

Every year, the Electrical Safety Foundation International runs a month-long campaign in May to improve electrical safety in your community, organization, school or family. This year, the theme of National Electrical Awareness Month is “Decoding the National Electric Code (NEC) to Prevent Shock and Electrocution.”

 

Raising awareness about electrical safety in various settings is the first step to reducing electrical fires, injuries and – in the worst of cases – death. In fact, in the construction industry, electrocutions account for nearly 10 percent of all fatalities.

 

Though the most at-risk sector is construction, the ESFI encourages every workplace to be actively involved in the month-long campaign to increase safety around electricity. Whether you’re an employer or employee, part of your job should be to help promote safety in the workplace to ensure you – and your co-workers – are prepared in the event of a problem. According to the Occupational Safety and Health Administration, you should check to ensure existing work conditions meet all standards and compliance regulations as well as train your people to recognize potential electrical hazards.

 

Want to do your part to celebrate National Electrical Awareness Month? Follow these tips from OSHA:

 

  • Assume that all overhead wires are energized at lethal voltages. Never assume that a wire is safe to touch even if it is down or appears to be insulated.
  • Never touch a fallen overhead power line. Call the electric utility company to report fallen electrical lines.
  • Stay at least 10 feet (3 meters) away from overhead wires during cleanup and other activities. If working at heights or handling long objects, survey the area before starting work for the presence of overhead wires.
  • If an overhead wire falls across your vehicle while you are driving, stay inside the vehicle and continue to drive away from the line. If the engine stalls, do not leave your vehicle. Warn people not to touch the vehicle or the wire. Call or ask someone to call the local electric utility company and emergency services.
  • Never operate electrical equipment while you are standing in water.
  • Have a qualified electrician inspect electrical equipment that has gotten wet before energizing it.
  • If working in damp locations, inspect electric cords and equipment to ensure that they are in good condition and free of defects, and use a ground-fault circuit interrupter (GFCI).
  • Always use caution when working near electricity.

From our Lockout/Tagout Equipment to signs and identification products, Emedco has everything you need to improve electrical safety at all your facilities. Just give our team of professionals a call at (866) 748-5963 or visit Emedco.com to find safety solutions for every challenge.

Preventing Facility Hazards: Electrical Safety Tips You Need to Know

by Julianne Bass

electrical safety

Three of the top ten OSHA electrical safety violations are electrical in nature; in addition 5% of all on the job fatalities are due to improper interaction with electricity, proving that electrical hazards are a literal force to be reckoned with and require the proper attention from safety managers when assessing facility safety programs.

Here are 10 electrical safety tips to keep in mind when protecting your workers from electrical hazards.

  1. Electrical Safety is important, any workplace and position can be affected by electricity. Before you begin your day make note of any electrical equipment you may come in contact with and ensure that it is properly grounded before use.
  2. Standing in any type of wetness while using an electrical device of any kind is not a good idea. Try to avoid it whenever possible, this includes power tools, tablets, mobile phones, etc.
  3. Assume power lines are always energized whenever your works brings you to an area where you need to be around them. Use non-conductive materials, and tools when near them.
  4. A standard operating procedure in electrical safety to bring any machine being worked on to complete zero, fully de-energized before beginning repair or services.
  5. After bringing a machine to complete zero for servicing, always use proper lock out protocol to prevent co-workers from re-energizing a machine while it is being worked on.
  6. Never wear rings, watches, wristbands, or use metallic pencils or rulers while working with electrical equipment.
  7. Ask can this job be completed with one hand? Only using one hand to work reduces the chances of electricity going through the chest cavity in the event of an accident.
  8. If a spill happens on or near a machine do not try to clean it up. Shut the machine down completely and unplug it.
  9. Never touch electrical equipment unless you are specifically instructed to do so. It is advisable to consider the use of electrical safety signs, and make sure your hands are not wet or sweating and as precaution use the back of your hand if possible.
  10. The NFPA 70E Requirement were just made in 2015, refer to the changes to see what your facility should now be doing differently to ensure maximum workplace electrical safety.