0

Compressed Air - Setmark® Snap-Around Pipe Markers

Pipe markers save time - no need to clean pipes before installation.
View Product Details

Select Options

Compressed Air - Setmark® Snap-Around Pipe Markers

Starting at

$4.79

$3.19

Style No.

SM063
Supplied in : Each
Quantity Price

Details

Compressed Air - Setmark® Snap-Around Pipe Markers

  • Setmark® Pipe Markers are ideal for dirty, greasy or rough surfaces and indoor or outdoor pipes.
  • Precoiled markers snap in place - no need for tapes or adhesives, or to clean or degrease pipes.
  • "Strap Around" markers with free nylon ties are available for larger pipes.
  • Each marker includes arrows and is reversible - no need to know the flow direction before ordering.
  • Made from heavy vinyl with UV resistant inks for withstanding harsh environments.
  • Pipe marking meets ASME (ANSI) A13.1 Standard.
Overall Size 12LG: Fits Pipes 6" Thru 7-7/8" Dia., 12MD: Fits Pipes 4" Thru 5-7/8" Dia., 12SM: Fits Pipes 2-1/2" Thru 3-7/8" Dia., 24: Fits Pipes 8" Thru 10" Dia., 32: Fits Pipes 10" Dia., 8LG: Fits Pipes 1-1/2" Thru 2-3/8" Dia., 8SM: Fits Pipes 3/4" Thru 1-3/8" Dia., 8XSM: Fits Pipes 3/8" Thru 1/2" Dia..
Color Black on Yellow, White on Blue, White on Green.

Specifications

Documentation

Product Guides & Training Tools

Technical Information


  • Pipe Marker Comparison Chart
    > Download

ANSI PIPE MARKER SELECTION GUIDE

Emedco offers ANSI/ASME A13.1 compliant pipe marking products in a wide variety of styles, sizes, colors, and wording — including in-stock and customizable options to meet your exact specifications. We can also help you determine the number of pipe markers needed to complete your job.

 

Size

 

Emedco pipe marking systems meet ANSI/ASME size recommendations.

The A13.1 standard also makes recommendations as to the size of letter height and length of color field for various pipe diameters. These recommendations are shown in the table below. Emedco pipe markers, when used properly with arrows and banding tape or arrow tape, meet or exceed the standard.

 

Outside Diameter of Pipe or Covering Size of Letters Length of Color Field
0.7" - 1.3" (18 - 33 mm) 0.5" (13 mm) 8" (203 mm)
1.4" - 2.4" (34 - 61 mm) 0.7" (19 mm) 8" (203 mm)
2.5" - 6.7" (62 - 170 mm) 1.3" (32 mm) 12" (305 mm)
6.8" - 10" (171 - 254 mm) 2.5" (64 mm) 24" (610 mm)
Over 10" (Over 254 mm) 3.5" (89 mm) 32" (813 mm)

Note: For pipes less than 0.7" in diameter, a permanently legible tag is recommended

 

Color

 

Emedco pipe marking systems meet ANSI/ASME color recommendations.

 

Unmarked pipes are dangerous to both life and property. Numerous injuries have occurred due to the ignorance of pipe contents, particularly when outside agencies are involved during emergency scenarios.

 

ANSI/ASME A13.1 Guidelines (current) The official ANSI/ASME A13.1 color guideline states:“Color should be used to identify the characteristic hazards of the contents. Color should be displayed on, or contiguous to, the piping by any physical means, but its use shall be in combination with the legend.”

 

Fluid Service Color Scheme
Fire quenching fluids White on Red
Toxic & corrosive fluids Black on Orange
Flammable & oxidizing fluids Black on Yellow
Combustible Fluids White on Brown
Potable,cooling,boiler feed, & other water White on Green
Compressed Air White on Blue
Defined by user White on Purple
Defined by user Black on White
Defined by user White on Grey
Defined by user White on Black

 

Placement

 

According to ANSI/ASME A13.1, pipe markers should be positioned so that they are readily visible to plant personnel from the point of normal approach. Emedco pipe markers instantly tell you all you need to know about pipe contents, direction of flow and whether they’re hazardous or safe.

Pipes shall be marked as following:
Wording

 

Over 150 stock legends available, shop now. Still can’t find the wording you need? No problem: We can customize markers to your exact wording.